My sheep have been bedding down at the end of my shop but the planned use of that space is for lambing stalls and sorting area outside of the main fence. I was finally able to get to the project this week and finished it up this afternoon. This part of the building is typical pole barn and was open span except for the two end posts. Finding spots that was more dirt than rock worked out fortunately. The holes all had to be dug with a rock bar and manual post hole digger since there was way too much rock there to use the auger. I used Sheep and Goat Panels for the outside fence to make it sturdier than regular wire. The sorting chute and tilt table are just outside this pen.
After I got it all done the sheep stood there starting at what had been their bedding area trying to figure out how to get in.
